Skip to content
  • Home

Tag: component layout

Posted on May 4, 2022July 22, 2022

65816: Troubleshooting 3 – Revisiting the Build 4 Layout

I left Build 4 successfully running with the 65816 and 55 ns RAM. But it failed with memory corruption when I used 12 ns RAM. The problem was that occasionally during RAM writes, some address signals would change about 2 ns before the write enable signal would rise. This would result in a write to …

Continue reading “65816: Troubleshooting 3 – Revisiting the Build 4 Layout”

Recent Articles

  • S-Pixie: PCB Build Transmitter Testing
  • CW Messenger: Protoboard Build Start to Finish
  • CW Messenger: Prototype Testing
  • CW Messenger: A New Project
  • S-Pixie: Audio Amplifier

Admin

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org
Privacy Policy Terms and Conditions Contact Us
Copyright © 2020-2025 TRobertson